Wax Heater:
Technical specifications:
Voltage : 110V
Frequency : 50Hz/60Hz
Power : 40W
Volume : 1pcs*100G
Max Temperature :100 oC
Fits standard cartridges with the following measurements:
Height: 13.5 cm / 5.31 inch
Length: 5.5 cm /2.16 inch
Width: 2.25 cm / 0.88 inch
Warranty 1 year


Wax Necessities WX-C1 Wax Cartridge Heater.
Ideal for use with all Wax Necessities soft wax cartridges, the WX-1C heater offers a simple and reliable service. On the exterior, the heater is molded in a highly resistant APSthermoplastic plastic resin. and aluminum is used for the quality inner construction.
To prolong the life and efficiency of the warmer, it is recommended that a Wax Necessities soft wax cartridge always be inserted into the heating chamber. Never pour wax directly into the heating well.
To maintain the optimum condition of the heater, clean regularly. Use Wax Necessities Citrus Cleaner for heavy wax residues. Do not use Citrus Cleaner directly on the `Wax Necessities`LOGO printed on the heater.
Your warmer has been tested before leaving the factory and is guaranteed against all manufacturing defects, under normal use, for 12 months from the date of purchase. If the heater will fail to operate due to a defect in material or workmanship, we will repair or replace it with date proof of purchase. The guarantee does not apply to damaged lids or heaters resulting from misuse or accident.


INSTRUCTIONS FOR USE
Remove the heater lid and place the wax cartridge directly into the heating chamber (We recommend WaxNecessities cartridges).
Plugin the appliance. Redlight indicates power is on.
The indicator light will remain illuminated during operation time. Please allow 10-30 min, depending on the ambient temperature until the wax is ready to use.
To ensure the wax has reached a suitable temperature and to avoid loss ofproï¬table working time, it is recommended to plug in the heater approximately one-half an hour before services begin.
Unplug and cover the unit loosely with a lid when not in use.
Caution: Locking the lid tightly may cause the lid to break. If the lid adheres to the melting pot,pre-heat the warmer prior told removal to prevent the lid from cracking.

A WARNING
THE HEATER AND WAX ARE GETTING HOT. ALWAYS TEST WAX ON A SMALL AREA OF SKIN BEFORE APPLICATION.

Ideal for all Wax Necessities Cartridges3.4 oz

IMPORTANT SAFETY INSTRUCTIONS
Read all instructions before using the heater!
When using electrical appliances, basic safety precautions should be followed

WARNING
To reduce the risk of Injury:
Always test the wax on a small area of the skin before application.
Do not touch the metallic surfaces of the warmer. The unit is hot when in use.
Do not plug in a unit where the power cord can be tripped on or the record hangs over the edge of the working table and can be pulled off.
Do not leave the unit unattended.
If wax begins to smoke, unplug the unit immediately and have checked by an electrician.
Allow unit to cool before, cleaning, or storing.
Do not leave children unattended around the working heater. Use the unit only for the intended use as described in this booklet.
For best results, also refer to Necessities waxing instructions and instructions on the product package.

DANGER
To reduce the risk of electrocution: (which can result in Injuries 8. death)
Unplug the heater immediately after use.
Do not use it in bathrooms or on wet floors and surfaces.
LF unit falls into water, unplug immediately. Do NOT reach Into the water.
Never operate the heater if it has a damaged power cord or plug. if it is not working properly. or has been dropped or damaged.
DO not connect more than 3 heaters on an extension cord.

Rose Soft Wax Cartridge:
- Use with strips
- High titanium dioxide concentration
- Protects from irritation
- It is ideal for short, coarse hair
- Advanced adhesion
High-density wax. High titanium dioxide concentration wax, is characterized by advanced adhesion. Non-transparent.
Temperature: max 39 degrees C (102.2 degrees F)
Use strips.


Ingredients: Hydrogenated Polycyclopentadiene, Mineral Oil (Paraffinum Liquidum), Microcrystalline Wax (Cera Microcristallina), Theobroma Cacao Seed Butter, Ethylene/VA Copolymer, Titanium Dioxide (CI 77891), Beeswax (Cera Alba), Paraffin, Synthetic Wax, D&C Red 7 Lake (CI 15850).

Non-Woven Epilating strips 3 inches, W X, 8.75 inch L will help to achieve flawless removal of wax on large body areas.
Package of 100 epilating strips
High quality
3-inch x 8.75 inch
Perfect for the body and legs.

IMPORTANT NOTE: Professional Use Only! Please read carefully all the instructions on the product label before use.

SKU007791
21 Items

Data sheet

Color
Rose
Application area
Body
Legs
Skin type
All Skin Types

You might also like

Add Related products to weekly line up

in the same category

16 other products in the same category: