Waxness Cartridge Wax Heater WX-1C

Technical specifications:
Voltage : 110V -220V
Frequency : 50Hz/60Hz
Power : 40W
Volume : 1pcs*100G
Max Temperature :100 oC
Non adjustable temperature
Shell material : ABS
Inner material : Aluminum
Warranty 1 year
Fits standard cartridges with the following measurements:
Height: 13.5 cm / 5.31 inch
Length: 5.5 cm /2.16 inch
Width: 2.25 cm / 0.88 inch

Wax Necessities WX-C1 Wax Cartridge Heater.
Ideal for use with all Wax Necessities soft wax cartridges,the WX-1C heater offers a simple and reliable service. Onthe exterior the heater is molded in a highly resistant APSthermoplastic plastic resin. and aluminium is used for thequality inner construction.
To prolong the life and elficiency of the warmer, it isrecommended a Wax Necessities soft wax cartridge alwaysbe inserted into the heating chamber. Never pour waxdirectly into the heating well.
To maintain optimum condition of the heater, clean regularly.Use Wax Necessities Citrus Cleaner for heavy wax residues.Do not use Citrus Cleaner directly on the `Wax Necessities`LOGO printed on the heater.
Your warmer has been tested before leaving the factory and is guaranteed against all manufacturing defects, under normal use, for 12 months from date of purchase. If the heater will fail to operate due to defect in material or workmanship, we will repair or replace it with date proof of purchase. Guarantee does not apply to damaged lids or heater resulting from misuse or accident.
For warranties contact: office@beauty4pros.com

INSTRUCTIONS FOR USE
Remove the heater lid andplace the wax cartridgedirectly into the heatingchamber(We recommend WaxNecessities cartridges).
Plug in the appliance. Redlight indicates power is on.
The indicator light willremain illuminated duringoperation time.Please allow 10-30 min,depending of the ambienttemperature until the waxis ready to use.
To ensure the wax hasreached a suitable tem-perature and to avoid loss ofprofitable working time, it isrecommended to plug in theheater approximately onehalf hour before servicesbegin.
Unplug and cover unitloosely with lid when not inuse.
Caution: Locking lid tightlymay cause lid to break. If lidadheres to melting pot,pre-heat the warmer prior tolid removal to prevent lidfrom cracking.
Recommended Wax Necessities cartridges.
A WARNING
HEATER AND WAX ARE GETTING HOT.ALWAYS TEST WAX ON A SMALL AREAOF SKIN PRIOR TO APPLICATION.

Ideal for all Wax Necessities Cartridges3.4 oz

IMPORTANT SAFETY INSTRUCTIONS
Read all instructions before using the heater!
When using electrical appliances, basic safety precautionsshould be followed

WARNING
To reduce risk ofburns, fire, or Injury:
Always test wax on small area ofthe skin before application.
Do not touch the metallic surfac-es of the warmer. Unit is hotwhen in use.
Use only on a flat, solid, surface.
Do not plug-in unit where powercord can be tripped on or wherecord hangs over edge of workingtable and can be pulled off.
Do not leave unit on unattended.
If wax begins to smoke, unplugunit immediately and havechecked by electrician.
AlIow unit to cool before,cleaning or storing.
Do not leave children unattendedaround working heater. Use unitonly for the intended use asdescribed in this booklet.
For best results, also refer toWax Necessities waxinginstmctions and instructions onthe product package.

DANGER
To reduce risk of electrocution: (which can result in Injuries 8. death)
Unplug the heater immediatelyafter use.
Do not use in bathrooms or onwet floors and surfaces.
lf unit falls into water, unplugimmediately.Do NOT reach Into water.
Never operate heater if it has adamaged power cord or plug. ifit is not working properly. or hasbeen dropped or damaged.
DO not connect more than 3heaters on an extension cord.

For professional use only!