Waxness Hard & Soft Wax for Face & Eyebrows Mini Tin Kit 2 X 5 Oz / 141 G

Waxness Pink Glow is the ultimate rosin-free hypoallergenic hard wax specially formulated for the face and eyebrows. It is extremely flexible and gentle on the skin and picks up all the hairs, coarse and fine. It is highly visible on the skin with a catchy bright sparky pink magenta.

Directions: 

1. Melt the wax over low heat. Temperature: max 42 degrees C (107.6 degrees F). 

2. Test for the correct temperature. WARNING: An incorrect temperature may cause skin burns. 

3. Ensure skin is clean. 

4. Prep skin with powder or antiseptic lotion if necessary. 

5. Apply wax toward hair growth, not wider than 1-1/2". 

6. The wax will be ready to remove once it is no longer sticky to the touch. 

7. Flick the lower part of the strip, keeping the skin taut. 

8. Pull the hard wax of briskly against the growth of the hair, close and parallel to the skin. 

9. When treatment is completed, apply an astringent product followed by a soothing oil or lotion. Keep in a dry place at room temperature.

WARNINGS:
Please read the Instructions in full before proceeding with the treatment. Failure to follow instructions and warnings may result in severe skin irritation and other injuries. Prior to waxing, test a small area of the skin to be waxed and wait 24 hours. If no irritation occurs, you may proceed with the waxing service. 

INGREDIENTS: Hydrogenated Polycyclopentadiene, Ethylene/VA Copolymer, Paraffin, Cera Microcristallina (Microcrystalline Wax), Synthetic Fluorphlogopite, CI 77891 (Titanium Dioxide), CI 15850 (D&C Red 7), Tin Oxide. 

Waxness Pearl is the ultimate rosin-free hypoallergenic soft wax specially formulated for the face and eyebrows. It is extremely flexible and gentle on the skin and picks up all the hairs, coarse and fine. It is highly visible on the skin with a  bright sparky pearl white color.

Directions: 

Open a container of wax and place it in a heater over low heat. Max Temp 420 C / 107.6 F. 

Allow the wax to melt completely, heat to a lukewarm temperature, and stir for an even consistency. Test the wax temperature on a small area before applying. 

Clean the area to be treated. 

Prep the skin with powder or hydrophilic oil if necessary. 

Apply wax in a thin layer on the skin approx. the size of the strip. 

Place a depilating strip on a wax-covered area and rub firmly as you tug the strip in the direction of hair growth.  

While the skin is held taut, remove the strip strip in the opposite direction of the hair growth, close and parallel to the skin. 

Apply an antiseptic soothing oil or lotion when treatment is completed. Keep in a dry place at room temperature.

WARNINGS:

Please read the Instructions in full before proceeding with the treatment. Failure to follow instructions and warnings may result in severe skin irritation and other injuries. Prior to waxing, test a small area of the skin to be waxed and wait 24 hours. If no irritation occurs, you may proceed with the waxing service.

INGREDIENTS: Hydrogenated Polycyclopentadiene, Paraffinum Liquidum (Mineral Oil), Cera Microcristallina (Microcrystalline Wax), Ethylene/VA Copolymer, Synthetic Beeswax, Paraffin, Mica, CI 77891 (Titanium Dioxide).