Reference: SKU016242
No review at the moment
The base WX-3B supports simultaneous independent operation for up to 3 WX-1I warmers.
Made from high-quality ABS plastic resin, this base is sturdy and easy to use.
IMPORTANT SAFETY INSTRUCTIONS:
Read all instructions before using the heater!
When using electrical appliances, basic safety precautions should be followed.
WARNING:
THE HEATER AND WAX ARE GETTING HOT. ALWAYS TEST WAX ON A SMALL AREA OF SKIN BEFORE APPLICATION.
To reduce the risk of burns, fire, or Injury:
Always test the wax on a small area of the skin before application.
Do not touch the metallic surfaces of the warmer. The unit is hot when in use.
Use only on a flat, solid surface.
Do not plug in a unit where the power cord can be tripped on or where the line hangs over the edge of the working table and can be pulled off.
Do not leave the unit unattended.
If wax begins to smoke, unplug the unit immediately and have the electrician check.
AlIow unit to cool before cleaning or storing.
Do not leave children unattended around the working heater. Use the unit only for the intended use as described in this booklet.
For best results, refer to Wax Necessities waxing instructions and instructions on the product package.
DANGER
To reduce the risk of electrocution: (which can result in Injuries 8. death)
Unplug the heater immediately after use.
Please do not use it in bathrooms or on wet floors and surfaces.
lf unit falls into water, unplug immediately. Do NOT reach Into the water.
Never operate the heater if it has a damaged power cord or plug, is not working correctly, or has been dropped or damaged.
Do not connect more than 3heaters on an extension cord.
For professional use only!
Data sheet
- The base WX-3B supports simultaneous independent operation for up to 3 WX-1I warmers.
- Made from high-quality ABS plastic resin, this base is sturdy and easy to use.
- Made in Italy
0 review
0 review
0 review
0 review
0 review
Bring a smile to the treatment room, the `Happy Heater` is molded in a highly resistant, durable material. It is the perfect Professional spa accessory.
-Professional Stainless Steel Construction
-Size: Width:13.38â X Depth: 10.43â X Height 6.88â (36cm X 26.5cm X 17.5 cm)
-Holds 5.5 lb wax
-Temperature 42 C to 120 C (107.6 C to 248 F)
-Power 300W
-Only for use in the US (120V 60Hz)
-1 Year Warranty
-Lower height compact size heater
-Rapid electronic controlled heating
-Non-stick wax pot for easy cleaning
-Micro IC rapid controlled heating
-Only for hard wax beads
-1 Year Warranty
-Exclusive Waxness W-CUBE design
-Detachable inner aluminum wax pot
-1 Year US warranty
Professional Metallic External and Internal Construction
Size of the pot: Width 6.88â, Height 5.23â (Width 175mm, Height 133mm)
45 to 105 C ( 113 to 221 F).
Size of Heater: width 13", height 7.8", depth 9.5".
Holds 5.5 lb of wax
Power 350W
1 Year Warranty
0 review
- Ideal for use with all Wax Necessities soft wax cartridges
- WX-1I heater offers a simple and reliable service
- Voltage: 110V -220V
- Frequency: 50Hz/60Hz
- Power: 150W
- Made in Italy
-Digital temperature control with memory
-Dual digital temperature display (F/C)
-Exclusive Waxness W-CUBE design
-Detachable inner aluminum wax pot
-1 Year US warranty
-Digital temperature control with memory
-Dual digital temperature display (F/C)
-Exclusive Waxness W-CUBE design
-Detachable inner aluminum wax pot
-1 Year US warranty
0 review
- The base WX-2B supports simultaneous independent operation for up to 2 WX-1I warmers.
- Made from high-quality ABS plastic resin, this base is sturdy and easy to use.
- Made in Italy
0 review
-Suitable for all types of hard wax
-Holds 10 lb wax
-Professional metallic external and internal construction
-500W heating power
-1 year limited warranty
0 review
