Waxness Wax Heater WX1-C and 2 x Zinc Oxide Soft Wax Cartridge 1X Epilating Strips

Wax Heater:
Technical specifications:
Voltage : 110V
Frequency : 50Hz/60Hz
Power : 40W
Volume : 1pcs*100G
Max Temperature :100 oC
Fits standard cartridges with the following measurements:
Height: 13.5 cm / 5.31 inch
Length: 5.5 cm /2.16 inch
Width: 2.25 cm / 0.88 inch
Warranty 1 year
Wax Necessities WX-C1 Wax Cartridge Heater.
Ideal for use with all Wax Necessities soft wax cartridges, the WX-1C heater offers a simple and reliable service. On the exterior, the heater is molded in a highly resistant APSthermoplastic plastic resin and aluminum is used for the quality inner construction.
To prolong the life and efficiency of the warmer, it is recommended a Wax Necessities soft wax cartridge always be inserted into the heating chamber. Never pour wax directly into the heating well.
To maintain the optimum condition of the heater, clean regularly. Use Wax Necessities Citrus Cleaner for heavy wax residues. Do not use Citrus Cleaner directly on the `Wax Necessities`LOGO printed on the heater.
Your warmer has been tested before leaving the factory and is guaranteed against all manufacturing defects, under normal use, for 12 months from the date of purchase. If the heater will fail to operate due to a defect in material or workmanship, we will repair or replace it with date proof of purchase. The guarantee does not apply to damaged lids or heaters resulting from misuse or accident.

INSTRUCTIONS FOR USE
Remove the heater lid and place the wax cartridge directly into the heating chamber(We recommend WaxNecessities cartridges).
Plugin the appliance. Redlight indicates power is on.
The indicator light will remain illuminated during operation time. Please allow 10-30 min, depending on the ambient temperature until the wax is ready to use.
To ensure the wax has reached a suitable temperature and to avoid loss ofproï¬table working time, it is recommended to plug in the heater approximately one-half hour before services begin.
Unplug and cover the unit loosely with a lid when not in use.
Caution: Locking the lid tightly may cause the lid to break. If the lid adheres to the melting pot,pre-heat the warmer prior told removal to prevent the lid from cracking.
Recommended Wax Necessities cartridges.
THE HEATER AND WAX ARE GETTING HOT. ALWAYS TEST WAX ON A SMALL AREA OF SKIN BEFORE APPLICATION.

Ideal for all Wax Necessities Cartridges3.4 oz

IMPORTANT SAFETY INSTRUCTIONS
Read all instructions before using the heater!
When using electrical appliances, basic safety precautions should be followed

WARNING
To reduce the risk of burns or Injury:
Always test the wax on a small area of the skin before application.
Do not touch the metallic surfaces of the warmer. The unit is hot when in use.
Use only on a solid, surface.
Do not plug in a unit where the power cord can be tripped on or the record hangs over the edge of the working table and can be pulled off.
Do not leave the unit unattended.
If wax begins to smoke, unplug the unit immediately and have checked by the electrician.
Allow unit to cool before, cleaning or storing.
Do not leave children unattended around the working heater. Use the unit only for the intended use as described in this booklet.
For best results, also refer to the Necessities waxing instructions on the product package.

Do not use it in bathrooms or on wet floors and surfaces.
LF unit falls into water, unplug immediately. Do NOT reach into the water.
Never operate the heater if it has a damaged power cord or plug. if it is not working properly. or has been dropped or damaged.
DO not connect more than 3heaters on an extension cord.

For professional use only!

Oxide Soft Soft Wax Cartridge:
Zinc Oxide Advanced Formula for Sensitive Skin
- Extra creamy and smooth.
- Special formula against bruises and rushes
It- Ideal for removing short and thick hairs
- High Titanium Dioxide Content
- Hypoallergenic, No Colors, No Fragrance
- Enriched with Coconut Oil

Description: Waxness Zinc Oxide has a zinc oxide formula, giving wax special properties against bruises and rushes.
This type of wax is known for its effectiveness in removing thicker and shorter hairs.
While hardening, the wax forms a thin film that fixes all the hairs and ensures rigid adherence with the waxing strip. L 100% hair removal on the first try, no breaking hair.
Indications: To be applied with a spatula and removed with waxing strips.
Heat the wax in the heater to +42 degrees C/107 degrees F.
Stir the wax, ready-to-use wax must not be liquid but of honey consistency.
-Keep the heater close to the treatment bed to avoid dripping.
You can apply the strip to the same place 2 times maximum.
DIRECTIONS:
1. Place in a heater over low heat. Max Temp 42" C / 107.6 F.
2. Allow the wax to melt completely to honey consistency, and stir for even consistency. Test the wax temperature on a small area before applying.
3. Clean the area to be treated. 4. Prep the skin with powder or hydrophilic oil if necessary.
5. Apply wax in a thin layer on the skin keeping the cartridge with the roller down and moving it on the skin in the hair growth direction. approx. the size of the strip.
6. Place a waxing strip on a wax-covered area and rub firmly as you tug the strip in the direction of hair growth.
7. While skin is held taut, remove the strip in the opposite direction of the hair growth, close and parallel to the skin.
8. Apply an antiseptic soothing oil or lotion when treatment is completed.
CAUTION:
Please read the instructions in full before proceeding with the treatment. Failure to follow instructions and warnings may result in severe skin irritation, and other injuries.
-Before using, test a small area to be waxed and wait 24 hours. If no irritation occurs, you may proceed to use it.
-Do not apply wax on mucous tissues, blemishes, moles, warts, varicose veins, sunburns, or any inflamed areas.
-Do not wax if you use creams with tretinoin, chemical peels, or have had plastic surgery, without a doctor's release.
-Do not use it if you suffer from any medical condition that may affect or compromise the skin. Consult a doctor before using if you suffer from any skin-related disorders, circulatory problems, or diabetes.
-Do not use on nipples, perianal, vaginal, or genital areas. Do not use it to remove hair inside the nostrils, ears, eyelids, or eyelashes. -Do not use on areas that have been shaved, waxed, tweezed, or treated with hair removal creams within 24 hours.
-Avoid HOT baths, tanning beds, direct sun exposure, swimming, saunas, or other activities that may cause skin irritation.

IMPORTANT NOTE: For Beautician Use !! Please read carefully all the instructions on the product label before use.

Ingredients: Glyceryl Rosinate, Paraffin, Microcrystalline Wax, Beeswax, Hydrogenated Coconut Oil, Zinc Oxide, Titanium Dioxide